Sand and Wear Tester
Application area
The sanding and abrasion tester includes an abrasion tester and a sanding machine, combined with about 240 mesh special diamond abrasive, mainly used for the wear resistance of plastic flooring.
Applicable standards
GB/T 4085-2015 Semi rigid Polyvinyl Chloride Block Flooring
GB/T 11982.1-2015 Polyvinyl chloride roll flooring - Basic information of vinyl chloride roll flooring - Part 1: Non homogeneous polyvinyl chloride
GB/T 11982.2-2015- Polyvinyl chloride roll flooring - Part 2: Homogeneous polyvinyl chloride roll flooring
Technical parameter
Technical parameters of sand removal machine:
Model: BC-LSJ-4085
Sand falling speed: (21 ± 3) g/min, other speeds can be adjusted
Size: Approximately 500 * 400 * 650mm
Adjustment height range of sand pipe: 0-50mm
Adjustment method for sand pipe: thread adjustment
Supporting equipment: vacuum cleaner, wear tester
Stop sanding method: Disconnect the power supply
Power supply: 220V 50Hz
Technical parameters of wear tester
Model: JM-V
Stepper motor parameters: 2.5A 21kgcm
Rotary speed: 60/70r/min
Leather grinding wheel (2 pieces) size: Φ 52 × 12.7mm
Leather size: Width 12.7mm, Thickness approximately 4mm
Grinding wheel weight: 146g/piece
Weight balance (2 pieces): 1000g
Dimensions: 220 × 280 × 254 (length × width × height)
Host weight: 13kg
Brief description of operation steps
1. Assemble the sand dropping machine and the wear tester separately;
2. Assemble the sand dropping machine with the wear tester, and adjust the height of the sand dropping tube and other parameters according to the sample and test requirements;
3. Connect the power and start the test;
4. Control the testing process according to the test requirements and sample status;
5. Remove the sample, clean and observe.
Delivery List
Sanding machine, abrasion tester (including vacuum cleaner, weights, etc.), instruction manual, certificate of conformity, etc.